Inner Tie Rod Install Remover Removal Low Profile Tool 3/8" Drive
- Perfect tool to use with long length 3/8" extension to get to those hard to reach inner rods
- Allows Inner Tie Rod removal without removing the outer tie rod. Slide tool over the end and tighten collar
- Works with round and flat sided tie rods. Can also be used on all inner tie rods with 1-3/16 and 1-5/16 In
- Low profile tool for tight access and tool storage
- Tool size: 3.20" x 2.90" x 0.88"
- Advantages of this tool: Turns smooth shaft tie rods Perfect tool to use with long length 3/8" extension to get to those hard to reach inner rods Can remove nuts and insert U bolt over rod, then install serrated clamp Slide tool over rod and tighten collar to allow access with a 3/8-Inch drive extension Allows Inner Tie Rod removal without removing the outer tie rod Low profile tool for tight access and tool storage Works with round and flat sided tie rods Tool size: 3.20" x 2.90" x 0.88 Tie Rod Tools Easily Replaces Inner Tie Rod Ends Without Removing The Rack and Pinion.