Digital Cylinder Bore Dial Indicator Gauge Kit 1.4" to 6" in Case .0005"
- Range 1.400"-6.000" diameter, .0005" graduations, 6" depth
- For quick transferable accurate inside measurements
- Insulated Grip - Carbide Anvils - Tool weight 6.1 lbs
- Includes all the necessary spacers, interchangeable extensions and a formed plastic case.
- Radius-ed hardened tips improved accuracy
- Readout in English and Metric Lithium Battery Included Range 1.400" - 6.000" diameter, .0005" graduations, 6" depth Metric Range: 35mm to 150mm, 0.0127mm graduations, 150mm depth For quick transferable accurate inside measurements Insulated Grip - Carbide Anvils - Tool weight 6.1 lbs Includes all the necessary spacers, interchangeable extensions and a formed plastic case. Radius-ed hardened tips improved accuracy 100% Satisfaction Guarantee or we will refund purchase NOTE- The tool has 2 of the bore pins already installed in the holders, thus there will be 2 empty slots in the formed case. Electronic Dial Bore Gauge Set has a measurement range of 1.4 to 6" and gradient spacing is 0.0005". A minimum hold feature locks on the bore size as this direct-measuring gauge is rocked within the part to be measured. A two-point contact system is used to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. The gauge is self-centering and includes an extension holder. Bore gauges measure holes, or bores. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring.